Connector
An in-house connector designed for fire prevention and suppression, featuring overheat detection and a built-in extinguishing agent. It also features Korea’s first LED light designed for convenient nighttime charging.
*Product images may differ slightly from the actual product.
WEV-D100PM-C1A
- Full charge
- About 1 hour
- Charging speed
- 100kW
- Installation site
- Public institutions, shopping centers, parking lots, rest areas
*Time to a full charge varies with battery capacity, temperature and other conditions.
Connector setup
Charger color
Connector color
Cable color
Specifications
- Capacity
- 100kW
- Dimensions
- 865(W)x1,700(H)x540(D)mm
- Input
- Three-phase four-wire, AC 380V, 60Hz
- Output
- DC 150~1000V, ~125A/200A
- Cooling
- Forced air cooling
- Noise
- 65dB or less
- Charging interface
- CCS1
- Display
- 21.5-inch touch display
- Safety features
- Input/output overvoltage and overcurrent detection, abnormal temperature and output leakage detection
- IP
- IP44
- Certifications
- OCPP 1.6, high-efficiency equipment certification, KC certification, type approval
- User authentication
- RFID card, credit card, NFC, QR payment
Features of the 100kW fast charger
A 21.5-inch touch display gives excellent usability and visibility, and charging is about 7 times faster than a 7kW slow charger, with the vehicle’s SoC used to tune the charge.
1. 21.5-inch display
A tailored UI and helpful content make charging easier to approach and more convenient
2. Exterior body
A patented design with custom colors that suits a range of settings
3. Status LED
An LED that shows the charging state
4. Emergency stop button
Cuts power at once in an emergency
5. Card tagging
Membership card authentication starts a charge in three seconds
Charger status LED
5 colors let you read the charger’s state at a glance.
Ready to charge
The LED stays blue while the charger is on standby and during user authentication via membership card or QR code, as the charger exchanges data with the server and vehicle before charging begins.
Charging
The LED lights up green while the vehicle is charging.
Charge complete
The LED lights up blue when charging is complete.
Fault
If charging stops unexpectedly due to an issue such as abnormal temperature, overcurrent, or overvoltage, the LED blinks red.
Communication Failure
If communication fails, the LED blinks yellow, and the charger reboots after one minute.
Cable
We use air-cooled cables produced in-house by E.L. Electric. Fully integrated with the charger, they provide a safe and efficient charging experience.
PLC Modem and Fire Prevention
A PLC modem enhances battery safety by preventing overcharging and over-discharging. A built-in temperature sensor automatically controls charging speed to provide a safe and efficient charging experience.
Introducing the fire-prevention connector
WEV chargers work with every EV sold in Korea.
* For a Tesla, please have a compatible adapter ready.
